Welcome to visit Chengming Driving Technology (Kunshan) Co.,Ltd ，We will serve you wholeheartedly！

Hotline
400-0763-166

News Center

Contact information

HotLine：400-0763-166

Phone：0512-57970560

FAX：0512-57970119

Suzhou：Manager He 18013250267

Wuxi：Manager Yuan 18013250256

WebSite：www.fecochina.cn

Address: No. 8, Changlou Road, Economic Development Zone, Kunshan, Jiangsu


Home >News Center　>　Industry information

Why the Gear of Precision Planetary Reducer Fails

2022-02-22

　　1. In terms of pressure angle, the bearing capacity of small pressure angle gear is small; However, the gear with large pressure angle has a higher bearing capacity, but the bearing load increases when the transmission torque is the same, so it is only used in special cases. The tooth height of gear has been standardized, and the standard tooth height is generally adopted. Modified gear has many advantages, and has been wide...

More

Processing and maintenance of gear parts of precision planetary gear reducer

2022-02-18

　　The processing of gear parts of precision planetary gear reducer needs maintenance. First of all, the precision planetary gear reducer can only be installed on a flat, shock-absorbing and torsion resistant support structure. In any case, it is not allowed to use a hammer to drive the pulley, coupling, pinion or sprocket into the output shaft, which will damage the bearing and shaft.

More

Cylindrical roller bearing is one of the widely used bearings

2022-02-01

　　Cylindrical roller bearing is one of the widely used bearings. In fact, cylindrical roller bearing is very common in industry. Cylindrical roller bearing is a bearing used in some large machinery and can be seen everywhere in industry.||In modern industry, cylindrical roller bearings of size series and sizes are used. Most of them are single row bearings with cages. Single row and double row full roller bearings (withou...

More

Why should the servo motor be equipped with a reducer?

2022-01-25

　　The servo motor is equipped with a reducer to increase the torque. When the load is heavy, it is not cost-effective to simply increase the power of the servo motor. Therefore, it is reasonable to select a servo reducer with an appropriate reduction ratio within the required speed range. The servo stepping motor reducer itself is intended to slow down the speed and improve the output torque.

More


9 3 1 2 3 4 5 6 4 : 5/6Page,Total 21 records, 4 records/page GotoPage

    • Zhengming Transmission Technology (Kunshan) Co., Ltd. All rights reserved
    • Address: No. 8, Changlou Road, Economic Development Zone, Kunshan, Jiangsu
    • Hotline：400-0763-166
    • Phone：0512-57970560　　Suzhou：Manager He 18013250267　　Wuxi：Manager Yuan 18013250256
  • 苏ICP备88888888
Mobile website